4.5 x 8 CRYOLATOR

The WILEVCO 4.5 x 8 CRYOLATOR® offers the ultimate in coating temperature control for high capacity production, high ambient conditions or very thick products. At just 11 inches in diameter, a minimum of floor space is required whether mounted on the end of the mixer or post mounted.

TECHNICAL
Height	1680 mm 66 inches
Width	280 mm 11 inches
Weight	212 kg 468 lbs
Mounting Bushings	Center to Center: 5525 mm 21 3/4 inches Bottom bushing to floor: 410 mm 16 inches
Swept Surface Area	8600 sq. mm 9.26 sq. ft.
Product Volume	25.4L 6.7 gallons
Rotor Drive	Electric w/10:1 gear reduction: TEC 3 phase 1.5 KW (2 HP) Hydraulic: Eaton Charlynn 103-1004-010, .2969 L/min/rev (.0781 GPM/rev), 175 RPM typical
Refrigerant Requirements	43,360 kg cal @ -17 degrees C (180,000 BTU @ 0 degrees F)
Refrigerant Volume	8.1L 2.14 gallons
Rotor Drive	Type: 4-bolt flange, 2 inch IPT or 2-3/8 copper Center to Center: 1149 mm 45.25 inches Bottom Port to Floor: 410 mm 16 inches
WILEVCO Parts	Scraper Blade (3) C-116 Wilevco p/n 100-061 Top Bearing (bushing) C-13A Wilevco p/n 080-005 Bottom Bearing (bushing) C-14B Wilevco p/n 080-020 Top & Bottom Cap Gasket Wilevco p/n 080-180

Downloadable Marketing Literature Cryolators

Downloadable Refrigeration Flow Plans
To receive further information on Wilevco equipment, please click here.
To request a budget quotation, please click here.
To speak directly with a Wilevco representative, please call 978-667-0400.